Setting Environment
Do not locate in freezing places. If ice | Do not install it outdoors. |
forms, tank and pipes will break, causing | |
scalding and leakage. |
|
Do not install it as | It shall be hung on firm and solid wall. |
² »Ò °ª ²× °Ó ÎÚ Þ· Ũ ÅË ®µ µÄ Ø· ½
Do not install it in places unable to drain | If a drain hose is connected, it shall be |
connected to sewage drain, avoiding | |
water. | spilling the room. |
|
|
The tubes and pipes fitted on the product | are inseparable parts of the Safe Care |
technology, and shall not be removed by yourself. Otherwise, Haier shall not be liable for any damages or injuries caused due to resulted potential risks.
Description of the Symbols
Never do that
Be sure to act as per instructions
Parameters
Rated voltage: 230V~ , 50Hz | Dimensions: (see to Fig. 1) |
Power: 850 W /1300 W /2150 W | Weight: (see to Fig. 1) |
Rated pressure: 0.75 Mpa | Volume :(see to Fig. 1) |
Waterproof grade: IPX 4 ( ) | Tap water pressure: not less than 0.05 MPa |
Operation Instructions
Water heater automatically sets an energy saving temperature between 35
- 40
according to the difference between water temperature and ambient temperature (normally this medium temperature can ensure small demand but not shower. For shower, you need to quit Medium Warm mode, and press Mode button to enter 
, machine automatically restarts heating. Heating power level can be manually set with Power button.
Example: Fig. 10 shows Medium Warm mode. Press Power button to set power level 2150 W with corresponding indication lighted. The actual temperature then is 52 
. When it decreases to 34 
, machine will automatically 
and keeps warm. It cycles in this way. In this mode, the machine defaulted highest heating temperature 40
can't be adjusted.
HEATING
ACTUAL | ACTUAL |
KEEPING |
(Fig.10) | (Fig.11) |
7.Night Power Setting
With machine powered on, as described in Item 10, consecutively press Mode button
until it enters Night Power operation mode (with Night Power indication on the display). If you would use hot water in early morning, you may adjust operation mode to Night Power mode. Machine will heat / warm in default period (0:00 on and 6:00 off). Heating power level and highest temperature can be manually set. In this mode, you can press Set button to calibrate clock time.
In addition, in regional power consumption regulations, night power price rate is lower than in day, so Night Power mode will be easier and more economic.
Note: In selecting Night Power function, water heater clock shall be adjusted to local time. Inaccurate clock will cause night period partly charged as day use. (Only for regions with Peak and Valley Electricity Rates)
Example: With machine powered on, press Mode button to select Night Power mode. When PC clock displays 00:00, machine automatically starts heating. It enters warm status after reaching setting value and has thermostat control during 0:00 
6:00. (see Fig.11)
8.Intelligent Heating Function
Intelligent heating function means that the system can analyze, process and memorize user's water use habits in one week, and accordingly heat water in advance automatically. With machine powered on, consecutively press Mode button until it enters Intelligent operation mode with intelligent indication lighted on. System automatically starts heating in the first memorized heating time since then. Heating power and highest temperature can be manually set.
In
Notes: 1. In any mode after powering on, Intelligent Heating function can memorize your water use habits. If you bathe in a fixed period everyday several times a week (4 times or more than 4 times), system will analyze and memorize your this habit and automatically start heating in advance.
2. Only in Intelligent mode can Intelligent function be executed.
SET | HEATING | SET |
KEEPING
(Fig.12) | (Fig.13) |
