Haier FCD JTHA40-III(E), FCD-JTHA50-III(E), FCD-JTHA60-III(E) Installation, Safety Precautions

Models: FCD JTHA40-III(E), FCD-JTHA50-III(E), FCD-JTHA60-III(E) FCD-JTHA40-III, FCD-JTHA50-III, FCD-JTHA60-III

1 6
Download 6 pages 44.4 Kb
Page 5
Image 5
Installation

Installation

The water may drip from the discharge pipe of the pressure relied device and that this pipe must be installed in a continuously downward direction and in a frost-free environment. Check safety valve once a month as follow: move the small handle of safety valve, if there's water flowing out, safety valve is normal; if there's no water flow, please contact local after-sales service station.

Safety Precautions The pressure relief device is to be operated regularly to remove lime deposits and to verify that it is not blocked.

Connect to drain hose

Safety Precautions

22

0V

Hz

50

 

 

Check if the ammeter and the diameter of the wires are in

 

accordance with the rated current of the water heater. If

 

necessary please have it checked by experienced

The water heater adopts power supply of 220V~ ,50Hz.

electrician.

 

 

£Ð

¡

 

л

 

 

 

 

²

 

 

 

Attentions in Installation

Attentions in Installation During installation, adequate space must be reserved for future maintenance and repair. If the water heater is installed within decoration boards, the right board shall be removable to facilitate removing the plastic cover during maintenance.

Description of the Symbols City water inlet pressure shall not be less than 0.05 Mpa.

Manual background Electric water heater shall be installed indoors with ambient temperature above 0Manual background . The pipes shall be collectively laid. Hot water outlet shall not be too far from use points. In case farer than 8 m, hot water pipe shall have a thermal insulation to minimize heat loss.

Manual background The mounting wall shall be firm and reliable to support twice the weight of water heater full of water. Non-load bearing walls or air brick walls must have corresponding protective measures like additional support, wall-through screws or back boards.

Manual background Electric water heater shall be located in a place easy for use, maintenance and with a floor drainer. In case the tank or pipes leak, nearby or lower facilities shall not be damaged. The installation location shall avoid being above toilet bowl, bathtub, washbasin or doorframe, where will cause a suppressed or unsafe feeling to users.

Manual background Power socket for water heater shall be in a dry place free of water splash. (splash- proof box is preferred)

Manual background Do not confuse inlet and outlet water pipes. Safety valve shall be installed at designated position with no random modification.

Be sure to use independent receptacle and earth it reliably.

Set

the receptacle of

 

the water heater at dry

position away from water spraying. Do not insert

The receptacle shall comply with the stipulation of

and

 

pull the power

 

plug

with wet hands .

national standard.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

¡

¡

²

 

 

²

 

 

 

Ô´

 

 

 

 

»¿

 

 

 

ÚÏÔ´

 

»¿

 

 

 

 

 

ÓÃ

 

 

ÉÒ

 

ÒÉ

 

 

 

Ó´ ÏÚ

 

 

 

Ô

 

 

¢¼

ÓÃ

 

 

 

 

Ô

 

Á

´Ó

 

 

 

 

 

¼¢

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Á

 

 

 

 

 

 

 

 

After installation, be sure to fill the heater completely with

In opening and closing the water valve, do not point

water before switching on the power in the first usage.

the shower head to human body. Otherwise it may

Children must take bath under the supervision of adult.

hurt by the spraying hot water.

C

 

 

 

 

 

 

 

 

 

In winter of cold area, if the heater is idle for a long

In case the power cord of the water heater is

period, please pull the handle of safety valve to discharge

damaged, be sure to have it replaced by after service

the water. Otherwise it may freeze inside the water heater

technicians with special cord offered by the

and cause damages.

manufacturer.

 

 

 

 

 

The product adopts the patent "Safe Care" technology of our company. As long as adopting civil power supply, even if the earthing wire is electrified by mistake, the "Safe Care" technology still can block the dangerous electricity, and ensure your personal safety. But if you find perceptible current, please pull off the power plug and contact local after service department for maintenance. Do not disassemble by yourself.

Description of the Symbols

Never do that

Be sure to act as per instructions

4

Page 5
Image 5
Haier FCD JTHA40-III(E), FCD-JTHA50-III(E), FCD-JTHA60-III(E) Safety Precautions, Attentions in Installation