English
8. Turn on the power at the circuit breaker/fuse box.
Before operating the dryer, make sure the dryer area is clean and free from combustible materials, gasoline, and other flammable vapors. Also see that nothing (such as boxes, clothing, etc.) obstructs the flow of combustion and ventilation air through the louvered panel located on the rear of the dryer.
9.Run the dryer through a cycle check for proper operation.
NOTE: On gas dryers, before the burner will light, it is necessary for the gas line to be bled of air. If the burner does not light within 45 seconds the first time the dryer is turned on, the safety switch will shut the burner off. If this happens, turnthedryerto“Off”andwait5minutesbeforemakinganotherattempttolight.
NOTE: Follow instructons supplied with kit.
CONNECTING THE DRYER TO THE GAS SUPPLY
A)Connect female 3/8” NPT elbow to gas inlet on dryer. Then connect 3/8” flare union adapter to female elbow.
IMPORTANT: To prevent the inlet from twisting, please use a pipe wrench to secure the dryer gas inlet. Affix Teflon® tape or pipe compound to adapter and gas inlet.
B)Attach the flexible metal gas line connector to the adapter.
C)Make sure flexible gas line seal is secure. Use two wrenches for the best possible connection.
D)To check gas inlet pressure, attach 1/8” NPT plugged tapping to dryer gas line
E)Use two adjustable wrenches to tighten every connection. IMPORTANT: Do not overtighten!
F)Open gas
16
