English
4-Wire Cord Connections
green ground screw
green neutral ground wire
red
green power cord | silver terminal |
ground wire |
|
| terminal block |
black
tighten nut to
white
these threads
power cord
strain relief mounting bracket
nut |
1.Remove the screws securing the terminal block access cover and the strain relief mounting bracket located on the back of the dryer upper corner.
2.Install a U.L. approved strain relief into the power cord entry hole of the mounting bracket. Finger tighten the nut only at this time.
3.Remove the green neutral ground wire from the green ground screw located above the terminal block.
Typical
Conductor
Receptacle
black 240V
white neutral
Typical
4Conductor Cord
red 240V
green ground
30 AMP NEMA
20
