GDZ22-1 manual 10/22/01 11:45 AM Page 8

English

Other Features

Your dryer also has the following features for your convenience:

Dry Sensor: (feature only active in auto dry cycle)

This senses the dampness in the clothes. The dryer will automatically shut itself off once it senses that the clothes are dry.

End of Cycle Signal:

Your dryer is equipped with an audible signal that will alert you every time the dryer load is finished drying.

Lint Filter:

All dryers come with a lint filter that needs to be cleaned before or after every use (read “Care and Cleaning Guide” Section).

Leveling Legs:

Your dryer has four leveling legs which are located in the front and rear corners of your dryer. After properly placing your dryer in its final position, you can level your dryer.

Leveling legs can be adjusted by turning them clockwise to raise your dryer or by turning them counterclockwise to lower your dryer.

Reversible Door:

Your dryer is designed so the door swing may be reversed at any time without additional parts. Conversion is accomplished by transferring hinges to the opposite side of the cabinet.

1.Open the dryer door. Remove the four hinge hole plugs from the left side of the door opening.

2.Remove the four screws that secure the door hinges to the dryer.

3.Rotate the door 180˚ and reinstall the door hinges to the dryer front panel with the four screws.

4.Install the four hinge hole plugs in the open screw holes on the right side of the door opening.

REMOVE 4 SCREWS

(ONE FROM EACH HINGE FIRST)

ROTATE THE DOOR 180˚

7

Page 8
Image 8
Haier GDZ22-1 user manual Other Features, End of Cycle Signal, Lint Filter, Leveling Legs, Reversible Door