Care And Cleaning
Clean the buildup such as lints on filters in time after each use, otherwise it will affect the performance of your dryer.
Please unplug the power cord first when cleaning it.
Cleaning of filters
The lint filter must be used for drying.
It must be cleaned in time befor and after each use.
1. Remove the filters
Remove by pulling straight up with hands inserted into the four holes around the exhaust vent shroud
in the sequence of ' Exhaust vent shroud - Lint filter -
Exhaust filter' , as shown in figure 1.
2. Clean the lints
Separate ' exhaust vent shroud' ,' lint filter' and' exhaust filter' and clean the lints on the filter and exhaust filter with a soft brush or vacuum cleaner.
Do not damage the filters (as shown in figure 2)
The filter fixed in the
bottom of the drum
Lint | Exhaust | Figure 1 |
filter | Filter |
Lint Filter Lints | Exhaust Filter | Dust Cleaner |
3. Install the filters |
| Figure 2 |
After cleaning, assemble in the sequence of ' exhaust filter |
| |
|
| |
|
| |
of filter with the projection in the center of drum and make |
|
|
sure that it is firmly inserted (as shown in figure 3). |
|
|
Note: The filter fixed in the bottom of the drum shall also |
|
|
be cleaned with a soft brush. |
| Figure 3 |
DO NOT USE YOUR DRYER WITHOUT THE LINT FILTER. |
| |
|
|
Clean the interior drum or dryer housing, with wet soft cloth, if stained. 
Do not wash directly with water.
Do not use thinner, gasolene or alcohol.
Do not use any type of spray cleaner when cleaning the interior. Hazardous fumes or electric shock could occur. If dryer drum becomes stained, clean the drum with a damp cloth. Remove any residue before drying the next load.
Clean cabinet with mild soap and water. Donot use harsh or abrasive cleaners, this could damage the dryer.
Do not let any kind of liquid get into the air intake or on the control panel.
