English
Dishwasher is leaking
•Dishwasher is not properly leveled.
You need to place the dishwasher on a flat hard surface. Avoid an uneven surface.
•Make sure the dishwasher is properly leveled. (See the installation instructions)
•Do not overfill the detergent or the rinse agent dispenser because it will cause over sudsing and overflowing.
•Do not use regular type hand or dish washing detergent in the detergent dispenser. These types of detergents are not recommended for dishwasher use.
Dishwasher will not fill
•Check the water supply.
Make sure that the water supply is in "ON" position.
•Check water pressure. Make sure the water pressure is at the proper level. (Between 20 – 120 PSI)
•Is the overfill protection float able to move up and down freely. If not, press down to release.
Detergent found in the compartment
•Do not load items too close to the detergent compartment. This may block the automatic release of the detergent.
•Do not use old or caked/dried detergent in the compartment because it will not dissolve properly and will leave a sandy residue on dishware.
•Is the cycle complete? The cycle may not be complete.
Dishwasher is running for too long
•The temperature of incoming water is below 120˚F. Raising your water heater setting will help to shorten the time of operation.
•Call the Haier Customer Satisfaction Center if this does not resolve the problem.
21
