03P-0006/HDB24EA manual 11/7/03 5:42 PM Page 10

English

Pausing a wash cycle

If you need to pause the dishwasher in the middle of the cycle to add or remove any items:

1.Open the door by squeezing the door latch slowly.

Note: Be careful moist hot air may rise out of the dishwasher.

2.Add or remove items. Once you have finished adding or removing, simply close the door.

3.The washing cycle will now be resumed.Open door protection Dishwasher will stop automatically if the door is opened during the operation. Once the door is closed the cycle will resume automatically.

Preparing to Wash Dishes

To get best results, practice the following before you put dishware in the dishwasher:

Discard big chunks of food from the plate before loading.

Remove sticky foods and loosen burned- on foods before loading.

Empty liquids such as juice, soup, soda, coffee or tea from glasses and cups before loading.

Rinse off acid based liquid, such as vinegar or lemon juice right a way.

Failure to do so may cause discoloration to plates, food containers and internal cabinet.

It is not necessary to rinse the dishes before loading the dishwasher. Food particals in the dishwasher will be disposed of by the built-in food disposal.

Tips to avoid stains and films

The following suggestions are recommended to prevent stains and films on dishware and utensils:

Some citric based food products, coffee, tea and iron deposits in water can cause a yellow or brown film on the inside surface if left for a long time period.

You must check water hardness to measure the amount of detergent needed to wash. If water is extremely hard, then it may be causing stains on items. You may need to use a water softener.

Do not overload the dishwasher.

Use the recommended water temperature to wash dishware.

8

Page 9
Image 9
Haier HDB24EA manual English