Operation method of fan controller | Haier HDU-42HT03/H instruction

Installation Manual For Indoor Unit

10. The operation method of fan controller

Through the fan controller switch in the electric box, the air volume of this unit can be continuously adjusted.(There is no fan controller for HDU-42CF03/H,HDU-42HT03/H)

It is unnecessary to adjust air volume through the duct side wind level (unit outside static adjustment). The air volume set should be in the operation air volume range.

Figure I shows the position of fan controller in the electric box and operation method.

After finishing the electric work, perform test run. According to the main points in Figure II making the chosen switch No. accordant. And confirm if it reaches the needed air volume.

Note:

1)When operating the fan controller, it is possible to touch the electric charging part, so do cut off the power supply.

2)Do not set the dial at the position less than 1.

3)The figure circled in Figure II indicate the capacity number of fan controller. The non-listed capacity number may exceed the permitted operation capacity range, so it is impossible to operate.

4)When delivering from factory, the capacity number of fan controller is set at “No.5”.

Rotate this switch

(capacity number setting:

No. 1 ~ No. 8)

Once the fan controller has trouble, this linker can perform emergency assistant control. When this linker is connected to the linker from the PCB, it can operate with total load.

When this linker is connected to the linker from the PCB, through the fan speed adjustment panel to adjust speed.

Figure 1

			High		Condition of standard air volume
			High		Condition of standard air volume
			Low		(air volume 100Pa)
	200					• •	•
							•	•
								•	•
			•						Example of
				• •					Example of
Pa	150				•		•		duct
	150						•
							•
pressure							•
pressure			•
	100		•
static	100
static			•
Outer			•
Outer	50
	50
	0	26	30		34 35		40		43
	Lower limit						Upper limit
			Standard air volume(m3/min)						Figure 2

The example of the method of choosing capacity number:

1)If the unit is in high-speed operation, needing take outer static pressure is 180Pa in capacity air volume 34m3/min as working condition point, according to Figure II “The characteristic chart of air volume”, the capacity number of fan controller is No. 2.

2)If the unit is in low speed operation, needing take outer static pressure is 60Pa in capacity air volume 32m3/min as working condition point, according to Figure II “The characteristic chart of air volume”, the capacity number of fan controller is No. 4.

HDU-42HT03/H specifications

The Haier HDU-42HT03/H is a cutting-edge heating, ventilation, and air conditioning (HVAC) solution designed to provide comfort and efficiency for residential and commercial spaces. This model stands out due to its innovative features, advanced technologies, and reliable performance.

One of the key features of the Haier HDU-42HT03/H is its impressive cooling and heating capacity. With a nominal cooling capacity of 4.2 kW and a heating capacity of 5.0 kW, this model is suitable for medium-sized rooms, ensuring that spaces remain comfortable regardless of outdoor temperatures. Its Inverter technology allows for precise control of the compressor speed, resulting in faster cooling and heating, less energy consumption, and quieter operation.

The unit’s energy efficiency is highlighted by its high SEER (Seasonal Energy Efficiency Ratio) and SCOP (Seasonal Coefficient of Performance) ratings, which contribute to lower electricity bills and reduced environmental impact. The HDU-42HT03/H also features a programmable thermostat, allowing users to set specific heating and cooling schedules, optimizing energy use while maintaining comfort.

For enhanced air quality, the Haier HDU-42HT03/H comes equipped with a multi-stage filtration system that effectively captures dust, allergens, and other airborne particles. This ensures that the air circulated within the space is clean and healthy, making it an excellent choice for individuals with allergies or respiratory issues.

Additional technological advancements in the HDU-42HT03/H include the use of eco-friendly refrigerant, which minimizes its impact on the environment. The model also integrates smart technology, allowing for remote operation via a smartphone application. This feature enables users to control the unit from anywhere, providing added convenience and flexibility.

In terms of design, the Haier HDU-42HT03/H is sleek and modern, allowing it to blend seamlessly into various interior styles. Its compact structure makes it suitable for a variety of installation environments, whether in homes or businesses.

Overall, the Haier HDU-42HT03/H is a top-tier HVAC solution, boasting powerful performance, energy efficiency, and user-friendly features. It is an excellent choice for anyone looking to enhance their indoor climate control with a reliable and effective system.

Haier HDU-42HT03/H installation manual Operation method of fan controller, Rotate this switch

Models: HDU-42HT03/H