Haier HDU-42HT03/H Malfunction, Unit fails to start, Cooling or heating is not sufficient

Models: HDU-42HT03/H

1 34
Download 34 pages 11.56 Kb
Page 16
Image 16
Doesn't any obstacle exist at the air inlet or outlet?
Isn't the room much crowded?

Malfunction

please check the following things about your air conditioner before making a servie call.

Unit fails to start

Is the power source switch adjust cut in?

ON

OFF

Power supply switch is not ON.

Is city supply power in

Isn't the signal receiving

Isn't the earth leakage

normal?

section exposed to the

breaker in action?

 

direct sunlight or strong

 

 

illumination?

It is dangerous. Turn off

 

 

Power

 

the power supply switch

stoppage?

 

immediately and contact

 

 

 

 

the sales dealer.

 

Cooling or heating is not sufficient

 

 

Is the thermostat adjust

Isn't the air filter dirty? Isn't any doors or windows

as required?

left open?

Isn't the swing louver horizontal?

(At HEATING mode)

If swing louver is horizontal, the blow wind does not reach floor.

Cooling is not sufficient

Isn't sun-shine invading

Isn't any unexpected

 

direct?

heating load generated?

 

 

 

 

The wind does not blow during heating operation

Isn't it warming up?

page 9

When the air conditioner does not operate properly after you have checked the above mentioned items or when the following phenomenon is observed, stop the operation of the air conditioner and contact your sales dealer.

The fuse or breaker often shuts down.

Water drops off during cooling operation.

There is a irregularity in operation or abnormal sound is audible.

Note:

This unit has a function of automatic restart system after recovering power stoppage. Please contact the sales dealer if it is not required.

15

Page 16
Image 16
Haier HDU-42HT03/H Malfunction, Unit fails to start, Cooling or heating is not sufficient, Cooling is not sufficient