Haier HDW101SST manual Fault finding, Resolving minor problems yourself, with the appliance itself

16

Fault finding

Resolving minor problems yourself

Experience has shown that you can resolve most problems that rise during normal daily usage yourself, without having to call out a service engineer.Not only does this save costs,but it also means that the appliance is available for use again that much sooner. The following list of common occurrences and their remedies should help you identify the causes of most problems.

Problems...

...when the appliance is switched on

Appliance does not start up

Fault with fuse in mains electricity supply.

Plug not inserted in wall socket.

Appliance door not closed properly.

Programme button has not been pressed.

Water tap not turned on.

Blocked strainer in water intake hose.

- The strainer is situated in the Aquastop or supply-hose connection.

Caution

Do not forget that repairs should only be carried out by a qualified specialist. Improper repairs can lead to considerable equipment dam- age as well as danger to the user.

...with the appliance itself

When the buzzer go-and-for beeps as this turn on 2 seconds and then turn off 2 seconds.

the water is turned on and the hose is connected properly;

the water supply to the house is on and has sufficient pressure; the water supply hose is crimped or bent;

the filter for the water supply hose is clogged.

the drain hose is too low.

When the buzzer go-and-for beeps as this turn on 3 seconds and then turn off 3 seconds.

the drain hose is crimped or bent.

the drain hose is too high.

When the buzzer go-and-for beeps as this turn on 6 seconds and then turn off 6 seconds.

the drain hose is too low.

When the "END" indicator is on ,at the moment, buzzer go-and-for beeps as this turn on 7 seconds and turn off 7 seconds.

the door is not properly closed.