Haier HLF103Q/R, CGDE700AW, CHLF103Q user manual Rack DRY Cycle, Other Features

Français

RACK DRY CYCLE

1.Press any button except "Off" button to power on.

2.Press "Timed-Dry Cycles" button and select "Rack Dry" cycle.

•After powering on, press "Timed-Dry Cycle" button to select "Rack Dry" program.

3.Press "More Time" And "Less Time" buttons to set a suitable time.

•After setting "Timed-Dry Cycle" to "Rack Dry", you can press these two buttons to increase or decrease drying time as you desire.

4-7.Press buttons "Temp", "Signal", "Wrinkle saver", and "Touch Up" to define your desired program.

Notes: For "Rack Dry" program, use of buttons "Temp", "Signal", "wrinkle Saver" and "Touch up" is the same as for auto-programs. "Sensor Dry Level" is here inactive, pressing of which will get alarms.

8.Press "Start/Pause" button.

Other Features

Your dryer also has the following features for your convenience:

Lint Filter:

•All dryers come with a lint filter that needs to be cleaned before or after every use (read “Care and Cleaning Guide” Section).

Leveling Legs:

•Your dryer has four leveling legs which are located in the front and rear cor- ners of your dryer. After installing your dryer in its final position, you can level your dryer.

•Leveling legs can be adjusted by turning them clockwise to raise your dryer or by turning them counterclockwise to lower your dryer.

20