Note: this ATSC&Analog TV receiver can store the channels from 2~69, and the maximum of each channel has 8 programs. To select the desired programs by using - button and numeric buttons.
Do as follows:
To select CH 13 NO. 2
Press 1 and 3, then press - and input 2.
Once the input is done, it will start broadcasting the selected channel immediately.
ADJUST THE VOLUME
Too loud the voice will damage your ears, to adjust the volume, use the VOLUME UP/DOWN buttons on the main unit or on the remote control.
AUDIO EFFECT OPTIONS
This TV set is with two speakers inside the front panel, which are enabled immediately it is powered on.
TV SETTING MENU
Press TV/AV button on the remote or MODE button on the main unit to select TV mode, then Press once the MENU button, the screen will pop up a setting menu;
use the NAVIGATION LEFT/RIGHT buttons to select among the setting options, then press NAVIGATION UP/DOWN button to enter the sub menu, again use NAVIGATION LEFT/RIGHT button to select the desired option or adjust and press OK/ENTER Button to confirm the item to be set; Press MENU button to go to previously menu and press EXIT button to exit the menu interface.
Picture Mode | Personal |
Contrast | 62 |
Brightness | 53 |
Sharpness | 50 |
Tint | 0 |
Color | 60 |
UP/DOWN | ADJUST MENU:EXIT |
Picture mode: it is used to select the desired picture mode.
Contrast: it is used to adjust the contrast effect according to your own favorite.
Brightness: it is used to adjust the brightness effect according to your own favorite.
Sharpness: it is used to adjust the sharpness according to your own favorite.
Tint: it is used to adjust the tint effect according to your own favorite.
Color: it is used to adjust the color according to your own favorite.
Balance |
| 0 |
| ||
| ||
Audio Language | English | |
UP/DOWN 
ADJUST MENU:EXIT
Balance: it is used to adjust the balance effect according to your own favorite.
Audio language: it is used to select the desired audio output language.
OSD Duration |
| 60 Sec |
Sleep Timer |
| Off |
Time Zone |
| Central |
Daylight Saving Time | Off | |
Clock |
| |
UP/DOWN | ADJUST | MENU:EXIT |
|
|
|
OSD Duration: it is used to set the OSD display duration.
Sleep Timer: it is used to set the sleep timer to auto power off the set.
Time Zone: it is used to select time zone from different region.
Daylight Saving time: it is used to advance one hour of the daylight time in summer in order to save the power. Clock: during DTV mode, it is used to show code create date.
Menu Language | English |
Color Mode | Normal |
Zoom Mode | Wide |
Closed Caption |
|
Restore Setting |
|
UP/DOWN | ADJUST MENU:EXIT |
|
|
Menu Language: it is used to change menu language.
Color mode: it is used to change the color mode of screen.
Zoom Mode: it is used to select the display type.
Closed Caption: it is used to select the broadcasting program provides closed caption. There are three options as below:
CC mode: use to select on, CC on Mute, off.
Basic Selection: select among from CC1, Cc2, CC3, CC4,Text1, Text2, Text3 and Text4.
Advance Selection: service 1, Service 2, Service 3, Service 4, Service 5, Service 6,
Restore Setting: select this option to restore the factory setting.
AntennaAir
Auto Scan
Show/Hide
Favorite
Channel No.
Channel Label
UP/DOWN 
ADJUST MENU:EXIT
Antenna: it is used to select the Antenna type CATV or air.
Auto Scan: use this function to auto scanning and stored tuned channels. Select auto scan option, then press NAVIGATION RIGHT button to access the submenu, select the desired Cable system and then enter the auto scan option to begin auto scan.
Show/Hide:it is used to show or hide the programs according to your own favorite.
Favorite: it is used to select your favorite programs.
Channel NO.: Select the desired program from this option.
Channel Label: it is used to edit the name of the selected program.
4
