Preparation Before Use
Remove all packing materials, including foam, base pads, and tape used to attach accessories.
C h e c k a c c e s s o r i e s a n d |
|
| |
documents: |
|
| |
section | |||
Check materials against the | |||
packing list. If any are different |
|
| |
or missing, inquire with the |
|
| |
retailer. |
|
| |
Handles Install and Removal:
Note: Remove protective plastic covering from all handles.
1. Refrigerator and Freezer Door Handles Installation
a.) handles are packed inside the fresh food compartment.
b.) carefully remove the handles from the packing material. c.) Position the long handle marked REF TOP to the right door of the refrigerator.
d.) Align the handle onto the handle bolts. e.) Pull the handle downward until handle locks in place.
f.) Repeat steps above for long freezer door handle (FRZ TOP).
2. Convertible Drawer Handle Installation
a.) Position the short handle onto the Convertible Drawer Bolts (slight horizontal bend upward). b.) Pull the handle to the left until handle locks in place.
3.Removing Handles Follow Opposite Process
4.Door Bin Installation
a.) Remove 4 door bins from inside the fresh food and freezer compartments. b.) Carefully remove all protective wrappers.
c.) Position the narrow bins (2L) onto the lower door liner tabs of the fresh food door to clear crispers properly. d.) Position bins down over tabs to lock in place.
e.) Position the remaining bins as shown (see picture).
Copy the fridge model number and manufacturer's serial number for all service calls or inquiries you may have in the future.
It is recommended to clean the fridge before use. Mix 4 liters of water with 1 tsp baking soda. Wipe the interior and exterior with a soft cloth moistened with this mixture
On Standby:
After the fridge is put into place, adjusted, and cleaned, connect the power to begin normal operation.
Connecting the Power:
The default temperatures for all three compartments are set at the m i d d l e r a n g e f o r f r e e z e r , refrigerator and convertible drawer as a refrigerator.
Put food inside the fridge:
After the fridge has been plugged in and is fully cooled, it is safe to put in food and begin use.
Fridge work mode:
Manual adjustment: Set the temperature by pushing the
Every time the temperature settings are changed, it takes some time for the temperature to adjust. The length of time depends on the amount of change, the ambient temperature, frequent door openings, quantity of stored food, etc.
