Setting up the Refrigerator/Freezer Combo
Be sure to choose a flat and level setup location. Door adjustment |
|
|
|
|
|
|
|
|
|
| |||||
Use sturdy and fireproof supports to correct an | If the freezer compartment door is lower than | ||||||||||||||
unevenness in the floor. Turning an appliance | that of the refrigerator compartment, insert the | ||||||||||||||
foot clockwise raises the appliance, turning it | wrench in the groove of the left screw and turn it | ||||||||||||||
anticlockwise lowers the appliance. | in the direction of the arrow until both doors are | ||||||||||||||
| the same height. | Height difference | |||||||||||||
|
|
|
|
|
| ||||||||||
|
|
|
|
|
|
|
|
| Height | ||||||
|
|
|
|
|
|
|
|
| difference | ||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Wrench | Left screw |
| If the freezer compartment door is lower than | |
Protect the setup location against direct sunlight | that of the refrigerator compartment, insert the | |
or heat sources. | wrench in the groove of the left screw and turn it | |
| in the direction of the arrow until both doors are | |
| the same height. |
|
|
| Height difference |
| Height difference |
|
|
| Wrench |
|
| Right bolt |
Avoid a damp setup location. Remove water | Be sure to leave at least 10 cm of space around |
and dirt with a soft rag. | the appliance. When installing the appliance in |
| an enclosed area, leave at least 25 cm of space |
| on the sides and 5 cm on the top and back. |
| Spacing |
12
