LG Electronics 47LB1DA manual Hdstb Setup, When connecting Component cable, How to connect

1_512Ven-Edit1 06/10/11 2:51 PM Page 21

HDSTB SETUP

This TV can receive Digital Over-the-air/Cable signals without an external digital set-top box. However, if you do receive digital signals from a digital set-top box or other digital external device, refer to the figure as shown below.

This TV supports HDCP (High-bandwidth Digital Contents Protection) protocol for Digital Contents (480p,720p,1080i).

When connecting Component cable

1. How to connect

	Y PBPR	L R
1	Connect the video outputs (Y, PB, PR) of the digital set
	top box to the COMPONENT IN VIDEO 1 jacks
	on the set. Match the jack colors
	(Y = green, PB = blue, and PR = red).
	1	2
2	Connect the audio output of the digital set-top box to
	the COMPONENT IN AUDIO 1 jacks on the set.

2. How to use

■ Turn on the digital set-top box.
(Refer to the owner’s manual for the digital set-top box.)	S-VIDEO	VIDEO	AUDIO
		COMPONENT IN

■Select COMPONENT 1 input source with using the INPUT button on the remote control.

■If connected to COMPONENT IN2 input, select COMPONENT 2 input source.

Signal	Component 1/2	RGB-DTV	HDMI1/DVI,
			HDMI2
480i	Yes	No	No
480p	Yes	Yes	Yes
720p	Yes	Yes	Yes
1080i	Yes	Yes	Yes
1080p	24p/30p	24p/30p	Yes

(@ 24, 30, 60)

* In some resolution (1080p), the PIP, Twin Picture, TV Guide, and some other functions are not available.

CONNECTIONS & SETUP

21