LG Electronics 47LB1DA manual Screen Setup for PC mode, Overview

1_512Ven-Edit1 06/10/11 2:51 PM Page 34

CONNECTIONS & SETUP

Screen Setup for PC mode

Overview

When RGB connect to PC output and select the RGB-PC in Main Input, this function is used.

When HDMI IN 1 (DVI) connect to PC output and select HDMI1/DVI input, this function is used.

1 2 3

4 5 6

7 8 9

0 FAV

TIMER APM ADJUST

CONNECTIONS & SETUP

Adjustment for screen Position, Size, Phase, Reset

1Press the ADJUST button and then use D or E button to select Position, Size, or Phase.

2Press the ENTER button and then use D E F G button to make appropriate adjustments.

■The Phase adjustment range is -16 ~ +16.

In HDMI-PC/RGB-DTV mode, Phase is not available.

■The Size adjustment range is -30 ~ +30.

In HDMI-PC/RGB-DTV mode, Size is not available.

3Press the ENTER button.

Initializing (Reset to original factory values)

To initialize the adjusted values

1Press the ADJUST button and then use D or E button to select Reset.

2Press the ENTER button and then use F or G button to select Yes.

3 Press the ENTER button.

	1	2	3
Position	This function is to adjust picture
	to left/right and up/down as you
	prefer.
Size	This function is to minimize any
	vertical bars or stripes visible on
	the screen background. And the
	horizontal screen size will also
	change.
Phase	This function allows you to
	remove any horizontal noise and
	clear or sharpen the image of char-
	acters.

1 2 3

34