LG Electronics 47LB1DA manual 112, Acknowledgement j Set ID OK/NGDatax

1_512Ven-Edit2 06/10/11 2:54 PM Page 112

APPENDIX

APPENDIX

10. Tint (Command2:j) To adjust the screen tint.

You can also adjust tint in the Video menu.

Transmission [k][j][ ][Set ID][ ][Data][Cr]

Data Red : 0 ~ Green : 64

*Refer to ‘Real data mapping1’. G p.111.

Acknowledgement [ j ][ ][Set ID][ ][OK/NG][Data][x]

11. Sharpness (Command2:k) To adjust the screen sharpness.

You can also adjust sharpness in the Video menu.

Transmission [k][k][ ][Set ID][ ][Data][Cr]

Data Min: 0 ~ Max: 64

*Refer to ‘Real data mapping1’. G p.111.

Acknowledgement [k][ ][Set ID][ ][OK/NG][Data][x]

12. OSD Select (Command2:l)

To select OSD (On Screen Display) on/off.

Transmission [k][l][ ][Set ID][ ][Data][Cr]

Data 0: OSD off Data 1: OSD on

Acknowledgement [l][ ][Set ID][ ][OK/NG][Data][x]

13. Remote Control Lock Mode (Command2:m) To lock the remote control and the front panel controls on the set.

Transmission [k][m][	][Set ID][ ][Data][Cr]
Data 0: Lock off	Data 1: Lock on

Acknowledgement [m][ ][Set ID][ ][OK/NG][Data][x] If you’re not using the remote control and front panel controls on the TV, use this mode. When main power is on/off, remote control lock is released.

14. PIP / POP / Twin Picture (Command2:n)

To control the PIP (Picture-in-Picture)/POP/Twin pic- ture. You can also control the PIP/POP/Twin picture using the PIP button on the remote control.

Transmission [k][n][ ][Set ID][ ][Data][Cr]

Data 0: PIP Off	2:	Twin picture
1: PIP	5:	POP4(POP Scan)

Acknowledgement [n][ ][Set ID][ ][OK/NG][Data][x]

15. PIP Position (Command2:q) To select sub picture position for PIP.

Transmission [k][q][ ][Set ID][ ][Data][Cr]

Data 0: Right down on screen

Data 1: Left down on screen

Data 2: Left up on screen

Data 3: Right up on screen

Acknowledgement [q][ ][Set ID][ ][OK/NG][Data][x]

16 . Treble (Command2:r) To adjust treble.

You can also adjust treble in the Audio menu.

Transmission [k][r][ ][Set ID][ ][Data][Cr]

Data Min: 0 ~ Max: 64(*transmit by Hexadecimal code) *Refer to ‘Real data mapping1’. G p.111.

Acknowledgement [r][ ][Set ID][ ][OK/NG][Data][x]

17 . Bass (Command2:s) To adjust bass.

You can also adjust bass in the Audio menu.

Transmission [k][s][ ][Set ID][ ][Data][Cr]

Data Min: 0 ~ Max: 64(*transmit by Hexadecimal code) *Refer to ‘Real data mapping1’.G p.111.

Acknowledgement [s][ ][Set ID][ ][OK/NG][Data][x]

18. Balance (Command2:t) To adjust balance.

You can also adjust balance in the Audio menu. Transmission [k][t][ ][Set ID][ ][Data][Cr]

Data Min: 0 ~ Max: 64(*transmit by Hexadecimal code) *Refer to ‘Real data mapping1’. G p.111.

Acknowledgement [t][ ][Set ID][ ][OK/NG][Data][x]

19. Color Temperature (Command2:u) To adjust color temperature.

You can also adjust color temperature in the Video menu.

Transmission [k][u][ ][Set ID][ ][Data][Cr]

Data 0: Medium 1: Cool 2: Warm 3: User Acknowledgement [u][ ][Set ID][ ][OK/NG][Data][x]

20. Red adjustment(Command:v) To adjust red in color temperature Transmission [k][v][ ][Set ID][ ][Data][Cr] Data Min:0 ~ Max:C8

*Refer to "Real data mapping 2". G p.113.

Acknowledgement [v][ ][Set ID][ ][OK/NG][Data][x]

112