English
English
Installing Your Refrigerator
Unpacking Your Refrigerator
1.Remove all packaging material. This includes the foam base and all adhesive tape holding the refrigerator accessories inside and outside. Slide out and remove plastic or foam guard used to secure the compressor from shipping damage due to vibration and shock.
2.Inspect and remove any remains of packing, tape or printed materials before powering on the refrigerator.
Proper Air Circulation
•To assure your refrigerator works at the maximum efficiency it was designed for, you should install it in a location where there is proper air circulation, plumbing and electrical connections.
•The following are recommended clearances around the refrigerator: Sides……………3/4 "(19mm)
Top....................2" (50mm) Back..................2" (50mm)
55
