Global Technology Associates GBWA200501-01 manual Assembling the Compact Flash IDE Adapter

48 GB-Ware Firewall Product Guide

Warning

Improper grounding can damage your system or Compact Flash card, and may cause physical injury or death. Never service your GB-Ware system while it is plugged in or powered on!

Assembling the Compact Flash IDE Adapter

1)Insert the four white nylon mounting posts into the mounting holes in the adapter board. (You can also mount the adapter board in a hard disk drive bay using 3.5” hard disk drive mounting hardware.)

Inserting the Mounting Posts into the IDE Adapter Board

2)Holding the Compact Flash card with the label up, slide the card into the slot on the adapter board, pinholes in, until firmly and evenly seated.

Inserting the Compact Flash Card into the IDE Adapter Board

Installing the Compact Flash IDE Adapter

Open the case of your intended firewall. (Please contact the case manufac- turer if you have questions on how to complete this step.)

Locating IDE Controller Ports

Locate the IDE controller ports on the motherboard, and remove anything that is plugged into them. The Compact Flash module may not function properly with other components plugged into the IDE controller ports.