Global Technology Associates GBWA200501-01 manual Mounting the Compact Flash Card

4 – Troubleshooting 49

(Refer to the motherboard’s user guide if you cannot locate the IDE controller ports.)

Locating the Primary IDE Controller Port

Mounting the Compact Flash Card

Mount the adapter board securely inside the firewall’s case; find a place where the components fit easily and securely, and where the IDE cable can easily reach from the adapter board to the primary IDE controller port. DO NOT mount the adapter board onto or near other electronic components inside the case.

Warning

The Compact Flash card is NOT hot-swappable. Never insert or remove the Compact Flash card while the power is on. Doing so can damage the Compact Flash card, and electrical discharge could cause injury. Never open your GB-Ware firewall’s chassis while it is plugged in or powered on!

Mounting the Compact Flash IDE Adapter Inside the Intended Firewall