2 – Installation 15

Note

USB pen drives may appear, but should not be selected for installation as they are not IDE-bootable devices. CD-ROM or DVD- ROM drives will not be displayed by the GB-Ware system installation process, as they are not writable discs. Other drives will not display.

Device Designations

Designation

Description

Device Geometry*

 

 

 

da0

USB storage device

[978/4/32]

 

(Generic storage

 

 

device)

 

 

 

 

ad0

IDE storage device

[978/4/32]

 

(with device manufac-

 

 

turer identification)

 

 

 

 

*If there is an indication of the device size in the description, this can be used to help identify the correct drive. Device Geometry format is in cylinders/heads/sectors.

Once you have selected the desired device, press tab to OK, then press the

SPACE BAR or ENTER to continue.

Caution

Carefully select the correct storage device, especially when using a USB Compact Flash reader/writer to install GB-Ware on a separate system. Installing GB-Ware on the wrong device will overwrite the disk (e.g. selecting the system hard drive will overwrite your operating system or other data, destroying it). You may wish to disconnect non-GB-Ware hard drives before installing to prevent accidental erasure.

Installation Device Selection

Installing the Runtime

The next dialog will display the warning: Installing will destroy any existing data on <device number>!!! Are you sure you want to install GB- Ware? where “device number” is the Compact Flash card or hard drive you will be writing to, and “runtime version” is the GNAT Box runtime version you have selected.

Tab to OK, then press SPACE BAR or ENTER when you are sure you have selected the correct drive and are ready to install the runtime.

Page 19
Image 19
Global Technology Associates GBWA200501-01 manual Installing the Runtime