Global Technology Associates GBWA200501-01 manual Appendix, Installing the Compact Flash Card

4 – Troubleshooting 47

Appendix

Installing the Compact Flash Card

If you are installing your GB-Ware firewall on a Compact Flash card, use these instructions to install the Compact Flash card for your firewall. The instructions assume that the Compact Flash IDE adapter is being installed in the intended firewall; modification is necessary to install the GB-Ware firewall Compact Flash IDE adapter on an installation proxy computer.

Requirements

Required components include (clockwise from the left of the illustration):

•mounting posts

•Compact Flash IDE adapter board

•IDE cable

•512 MB GTA-certified Compact Flash card

This component kit is available for purchase from GTA; GB-Ware may also be installed to a hard drive instead of using a Compact Flash card kit.

Compact Flash IDE Adapter Components

Before beginning, do not plug in any part of the system; make sure that you are properly grounded to prevent static electricity discharge before opening the case.