Global Technology Associates GBWA200501-01 manual Using GB-Ware’s Gnat Box Installer

DO NOT ACCEPT

12 GB-Ware Firewall Product Guide

Caution

Installing GB-Ware on a hard drive will erase its contents and replace them with GB-Ware. If you wish to keep the data on a hard drive, do not install GB-Ware on it; instead, install GB-Ware on a different hard drive. You may also wish to temporarily disconnect other (non- GB-Ware) hard drives to prevent accidental erasure during firewall installation.

2.Power on the computer. Insert the GNAT Box System installation CD into the system’s CD-ROM drive.

3.Restart the computer using a cold reboot. (In a cold reboot, shut down, turn off, and then turn your computer back on.)

If the boot sequence is correctly set to boot from CD-ROM, the system will boot from the GNAT Box System installation CD.

Using GB-Ware’s GNAT Box Installer

After setting the BIOS, inserting the installation CD and restarting the computer, you will see the About GNAT Box System Software Runtime Installer screen for the installation CD. Press the SPACE BAR or ENTER key to continue and install GB-Ware.

About the GNAT Box System Software Runtime Installer

The GNAT Box System Software Licensing Agreement will appear. Use the TAB or arrow key to move to the selection. Press the SPACE BAR or ENTER to select your answer. Select VIEW LICENSE to read the terms of the soft- ware and hardware license. If you agree with the terms, select ACCEPT to

continue the installation. Theselection cancels installation and closes the program.