Haier HSU-18RS03/R2, HSU-22RS03/R2 operation manual Timer On/Off Operation

Operation

Timer On/Off Operation

Remote Controller	Set clock correctly before starting TIMER operation.
	1. After unit starts, select your desired operation mode
	Operation mode will be displayed on LCD.
	2. Timer mode selection
	Press TIMER button to change TIMER mode. Every time
	the button is pressed, display changes as follows:
	Remote controller:
					BLANK
		TIMER ON		TIMER OFF	TIMER ON-OFF
	Then select your desired TIMER mode (TIMER ON or
	TIMER OFF). "			"or "	"will flash.
	3.Time setting
	Press HOUR			button.
		Every time the button is pressed, time setting
		increases 1 min , if kept depressed, it will increase
		rapidly.
		Every time the button is pressed, time setting
		decreases 1 min, if kept depressed, it will decrease
		rapidly.
		It can be adjusted within 24 hours.
	4.Confirming your setting
	After setting correct time, press SET button to confirm
	"	"or"	"on the remote controller stops flashing.
	Time displayed: Unit starts or stops at x hour x min.
	(TIMER ON or TIMER OFF).

5.Cancel TIMER mode

Just press TIMER button several times until TIMER mode disappears.

Hints:

After replacing batteries or a power failure happens, time setting should be reset. Remote controller possesses memory function, when use TIMER mode next time,just press SET button after mode selecting if time setting is the same as previous one.

16