Haier HSU-22RS03/R2, HSU-18RS03/R2 operation manual Heat Operation

Operation

Heat Operation

Remote controller	1. Unit start
	Link with electronic power.
	Press ON/OFF on the remote controller, unit starts.
	The liquid crystal will display the working state of last
	time (Except Timer, Sleep, Power/Soft and Health
	airflow).
	2.Select operation mode
	Press MODE button. For each press, operation mode
	changes as follows:
	Remote controller:
	AUTO COOL DRY FAN	HEAT

Then Select HEAT operation

3.Select temp.setting

Press TEMP. button

Every time the button is pressed, temp.setting increase 1C,if kept depressed, it will increase rapidly

Every time the button is pressed, temp.setting increase 1C,if kept depressed, it will decrease rapidly

Select a desired temperature.

4.Fan speed selection

Press FAN button. For each press, fan speed changes as follows:

Remote controller:

LOW MED HI AUTO

Air conditioner is running under displayed fan speed

IN HEAT mode, warm air will blow out after a short period of the time due to cold-draft prevention function.

When FAN is set to AUTO, the air conditioner automatically adjusts the fan speed according to room temperature.

5.Unit stop

Press ON/OFF button, the unit stops.

13