Haier HSU-22RS03/R2 Dry Operation, Remote controller, Unit start, Select operation mode

Operation

Dry Operation

1. Unit start

Remote controller

Link with electronic power.

Press ON/OFF on the remote controller, unit starts. The liquid crystal will display the working state of last time (Except Timer, Sleep, Power/Soft and Health airflow).

2.Select operation mode

Press MODE button. For each press, operation mode changes as follows:

Remote controller:

AUTO COOL DRY FAN HEAT

Then

Select DRY operation

3.Select temp.setting

Press TEMP. button

Every time the button is pressed, temp.setting increase 1C,if kept depressed, it will increase rapidly

Every time the button is pressed, temp.setting increase 1C,if kept depressed, it will decrease rapidly

Select a desired temperature.

4.Fan speed selection

Press FAN button. For each press, fan speed changes as

follows:

Remote controller:

LOW MED HIAUTO

		Air conditioner is running under displayed fan speed
		In DRY mode, when room temperature becomes 2oC
COOL operation starts when room		higher than temp.setting,unit will run intermittently at
	Ultra-low air flow	LOW speed regardless of FAN setting.
temp.is higher than temp.setting.

Temp.setting+2oC	5.Unit stop
	Press ON/OFF button, the unit stops.
Temp.setting
	On reaching temp.setting +2oC
	unit will run in mild DRY mode.

11