Haier HSU-07LEK03, HSU-09LEK13 Indoor unit, Connecting the indoor/outdoor Electric Cable

Power cable: 3G1.0mm

Indoor unit

Connecting the indoor/outdoor Electric Cable

Removing the wiring cover

Remove terminal cover at right bottom corner of indoor unit, then take off wiring cover by removing its screws.

When connecting the cable after installing the indoor unit

1. Insert from outside the room cable into left side of the wall hole, in which the pipe has already existed.

2. Pull out the cable on the front side, and connect the cable making a loop.

When connecting the cable before installing the indoor unit

Insert the cable from the back side of the unit, then pull it out on the front side.

Loosen the screws and insert the cable ends fully into terminal block, then tighten the screws.

Pull the cable slightly to make sure the cables have been properly inserted and tightened.

After the cable connection, never fail to fasten the connected cable with the wiring cover.

Note: When connecting the cable, confirm the terminal number of indoor and outdoor units carefully. If wiring is not correct, proper operation can not be carried out and will cause defect.

1.If the supply cord is damaged, it must be replaced by the manufacturer or its service agent or a similar qualified person. The type of connecting wire is H05/07RN-F or 245IEC57(YZW).

2.If the fuse on PC board is broken please change it with the type of T. 3.15A/250V.

If the fuse of outdoor unit on PC board is broken, please change it with the type of T. 25A/250V.

3.The wiring method should be in line with the local wiring standard.

4.After installation, the power plug should be easily reached.

5.A breaker should be incorporated into fixed wiring. The breaker should be all-pole switch and the

distance between its two contacts should be not less than 3mm.

Indoor unit

HSU-09LEK03/(DB) HSU-12LEK03/(DB)

1(N)

2(L)

3(C)

Outdoor unit

HSU-108CH09

HSU-138CH09

3 4	Power cable:
	3G1.0mm
	3G1.0mm

Indoor unit Outdoor unit

HSU-12LEK13-M

3 4 Power cable:

	5G1.0mm
Indoor unit	HSU-12HE K03	Outdoor unit
	HSU-07HE K03
	HSU-09HE K03
	HSU-18HEK03
5

connecting wiring:

3G1.5mm +1X0.75mm Power cable: 3G1.0mm

3G1.5mm

3G2.0mm

Indoor unit HSU-18LEK13Outdoor unit

4	Power cable:
3	3G2.5mm
2	4G0.75mm
1
Indoor unit	HSU-24LEK13

Power cable:
3G1.5mm
4G0.75mm2
Indoor unit	{
POWER
HSU-18LEK03/(DB)

Outdoor unit

5

4

3

2

1

Indoor unit

Power cable:
3G2.5mm
6G0.75mm
HSU-24HEK03	Outdoor unit

	BR	L
POWER	BL	N
SUPPLY	Y/G

	Outdoor unit
	1(L) 2(N)
Indoor unit	Outdoor unit

HSU-09LEK13 HSU-09LEK03 HSU-12LEK13 HSU-12LEK03 HSU-07LEK03

connecting wiring:

-mod 07-12: 3G1.0mm Power cable:

-mod 07-12: 3G1.0mm

3