Haier 0010554405B, HSU-24HK0307, HSU-24HD0307 For the units with, Fresh air function

Indoor unit

1.If the supply cord is damaged, it must be replaced by the manufacturer or its service agent or a similar qualified person. The type of connecting wire is H05/07RN-F or 245IEC57(YZW).

2.If the fuse on PC board is broken please change it with the type of T. 3.15A/250V.

3. The wiring method should be in line with the local wiring standard.

4. After installation, the power plug should be easily reached.

1(L)

2(N

)

Indoor unit		Indoor unit		Indoor unit	Outdoor unit
	Outdoor unit
			Outdoor unit
Connecting wiring 3G1.0mm2				Connecting wiring 3G2.5mm2
		Connecting wiring 5G1.0mm2
HSU-09C03/VA(ZXF)		HSU-09H03/VA(ZXF)		HSU-18C03/V(ZXF)
HSU-12C03/VA(ZXF)		HSU-12H03/VA(ZXF)			For the units with
		1(L)		1(	fresh air function
		2		L)
		(N)		2(N	To indoor unit
				)
Indoor unit			Indoor unit
Connecting wiring 3G2.5mm2
			HSU-12H03/VB(ZXF)
	HSU-22C03/V(ZXF)
		Outdoor unit	HSU-12H03/V(ZXF)	Outdoor unit
	HSU-22C03/V(ZF)
	HSU-24C03/V(ZXF)		HSU-18H03/V(ZXF)	Connecting wiring
			HSU-22H03/V(ZXF)
	HSU-24C03/V(ZF)		HSU-22H03/V(ZF)	-mod 12: 5G1.0mm2	To outdoor fresh air motor
Power cable:			HSU-24H03/V(ZXF)	-mod 18-22-24:
-mod 09-12:	3G1.0mm2		HSU-24H03/V(ZF)		The connecting method of
-mod 18:	3G1.5mm2		HSU-24HK0307	3G2.5mm2+2x0.75mm2
			HSU-24HD0307		fresh air box signal wire
-mod 22-24:	3G2.5mm2

5.Installation instruction on the indoor part of the fresh air device

1.Two ways for the installation of indoor part, as illustrated:

Way One:(For all the models)

In the guard ring, connect outlet joint with the fresh air tube . Way Two(Only for the models of 09,12):

Insert the joint of water collecting pan into the fresh air tube, then connect the other end of joint with mesh enclosure of water collecting pan.

Outlet joint (in guard ring)

Guard ring

Joint of water

collecting pan Fresh air tube

Fresh air tube

Installation way One Installation way Two

2.Another way for the models of 18,22 ,24,as illustrated:

Way One (right direction): Take off the lid for right piping pipe,put the Outlet joint into the lid,then put the fresh air tube into the outlet jont.

Way Two (left direction): Take off the lid for leftt piping pipe,put the Outlet joint into the lid,then put the fresh air tube into the outlet jont.

Outlet joint

Lid for under piping

Lid for left piping

Fix with adhesive tape
Change for fresh air tube	5
Drain hose