Channel menu
Here describes the case for searching and memorizing channels for DTV/ATV.
MUTE
Q.VIEW | INFO |
INPUT | TV/DTV |
1 | 2 | 3 |
4 | 5 | 6 |
7 | 8 | 9 |
SAP | 0 | P.MODE |
|
| |
OK |
| - |
| CH+ |
|
VOL | MENU | VOL |
-+
CH-
CCSLEEP FAV.LIST
GUIDE ARCCH.LIST
EXIT
AUTO SCAN (DTV/ATV) (When using antenna)
The channels broadcasted in DTV and ATV are automatically scanned and memorized. Only the receivable channels in the area where this TV is used will be memorized.
AUTO SCAN (CATV) (When using basic cable)
The channels broadcasted in CATV are automatically scanned and memorized.
NOTE:
Be sure that antenna or cable is connected properly before plugging the power cord.
1Press MENU, and then press VOL+/- button to select CHANNEL menu, then press CH- button to enter.
2 Press CH+/- button to |
|
select the RECEPTION | 0101 |
option. |
|
CHANNEL | |
SKIP | OFF |
RECEPTION | AIR |
3 Press VOL +/- button AUTO SCAN |
|
to select AIR/ CABLE. COLOR SYSTEM | AUTO |
4 Press CH +/- button | Only in analog signal |
to select AUTO SCAN option. |
|
5Press VOL+ button to start scanning.
When you press VOL+ on the remote control, scanning the channels in both analog and digital modes will automatically start.
When scanning is completed, the memorized smallest channel will be displayed.
When you press MENU button while scanning, the scanning is interrupted and the memorized smallest channel is displayed.
14
