How to change the direction of the drain hoses
Figure 1 indicates the ex factory installation | Back | |
position of the drain hose. |
| |
Soft item | Front | |
Extend the drain hose from the side of spin tub | ||
|
Put soft items on the ground. Lean the machine down gently with the front surface facing the ground. Take off the drain hose from the cabinet. Dismantle the drain hose fixing clamp and take the hose out of the fixing groove.
(See to Figure 2).
Figure 1
Drain hose fixing clamp
Soft item | Figure 2 |
|
Embed the drain hose into the groove along the side of the spin tub in the order of (1)~(3), heading for the side of the spin tub. (See to Figure 3).
Embed the drain hose into the groove with | Extend to the |
hands. Take care not to damage the drain | spin tub side |
hose in fastening the fixing clamp. |
|
Embed into the groove in turn
Figure 3
Install the water inlet hose; Select the water level
Insert the water inlet hose into the
Water inlet hose
Select water level according to the quantity of the laundries.
Set the water level adjusting lever to needed line.
Water level adjusting lever
Max
Maximum 
Med 
Medium
Min
Minimum
5
