Washing sequence
Inlet selector
WASH SPIN
Wash timer
(To set to below 2 minute, first set to 6 minute then turn it back. it can increase the service life of the timer).
OFF
15
3
12
6
9
Wash selector
(Standard current, strong current)
Drain selector |
| Spin timer | |
(Do not set drain selector | (To | set to below 1 minute, | |
first set to 2 minute then | |||
on Drain position during | |||
turn it back. it can increase | |||
washing) | |||
the service life of the timer). | |||
| |||
|
| OFF | |
| 5 | 1 | |
DRAIN |
| ||
| 4 | 2 | |
|
| 3 | |
WASH TIMER
WASH SELECTOR | DRAIN SELECTOR | SPIN TIMER |
Wash
1
Inlet selector
(1)Wash side .(Figure 1)
(2 )Adjust water level rod to a position as needed.
2
Fill water and add solved powder detergent until water reaches a suitable level.(Figure 2)
It begin to wash to dispense detergent uniformly.
WASH SPIN
Figure 1
Figure 2
STRONG 
3
Put in the wash load, and supplement water as necessary.
4
Select the current
Select the strength of the current according to the laundries. (Figure 3)
5
Select the washing time
Select the washing time according to the laundries. (Figure 4)
STANDARD
Figure 3
WASH SELECTOR
OFF
15 
3
12
6
WASH TIMER | 9 |
| |
OFF | Figure 4 |
6 After washing,set the DRAIN SELECTOR |
|
at DRAIN .(Figure 5) | DRAIN |
Figure 5
DRAIN SELECTOR
8
