Install the lint filter
Put the underside of the lint filter into overflow filter then push the upside into overflow filter.
After installation, please refer that the lint filter installed to the right station, otherwise the lint filter may be fallen off when washing, influencing your use.
overflow filter
lint filter
How to change the direction of the drain hoses
Figure 1 indicates the ex factory installation |
|
position of the drain hose. | Soft item |
Extend the drain hose from the side of spin tub
Back
Front
Figure 1
Put soft items on the ground. Lean the machine 
down gently with the front surface facing the 
ground. Take off the drain hose from the cabinet. 
Take the hose out of the fixing groove. 
(See to Figure 2).
Soft item
Embed the drain hose into the groove along the side of the spin tub in the order of (1)~(3), heading for the side of the spin tub. (See to Figure 3).
Embed the drain hose into the groove with hands. Take care not to damage the drain hose in fastening the fixing clamp.
Extend to the spin tub side
Figure 2
Embed into the groove in turn
Figure 3
Install the water inlet hose; Select the water level
Insert the water inlet hose into the |
|
entrance on the control pane directly.(pull it | Water inlet |
out to dismantle it) |
|
Select water level according to the quantity of the laundries.
Set the water level adjusting lever to needed line.
| Water level |
| indicator |
Maximum | Max |
| |
Medium | Med |
| |
Minimum | Min |
|
5
