Installation and adjustment
Please install and adjust the machine according to the requirement of the manual. It is very important to your security and correct operating the machine.
Install the lint filter | Install the bottom plate |
Push the lint filter downward to location for lint filter.
After you open the package, please lean the washing machine gently down on soft items ( like the towel cloth, blanket, etc. ).
Install the bottom plate to the bottom of the machine with the seven screws by a cross screwdriver, then lift the machine up gently. See to the figure:
Back
Front
Screw
Bottom plate | Soft items |
|
|
Adjust the installation position
The largest allowed slope of the shank base of the machine is 2 
. The slanting or rough ground will result in unstable running or stoppage of the machine. Please adjust it with following methods:
Adjust the adjustable foot:
1.To twist the adjustable foot, please first lift up the side of the foot slightly, loosen the adjustable nut, and twist the foot.
2.Fasten the nut after adjustment.
adjustable nut
Loosen 
Fasten
adjustable foot
High Low
4
