Haier HWM55-10 user manual Trouble shooting Answer to question, Common phenomena

Trouble shooting Answer to question

(If there's breakdown, please pull off the power plug before checking) The following phenomena are not breakdowns sometimes. Please confirm again before sending it to repair. If there are real breakdowns, please come to the special maintenance department or after-sale service department of our company. Do not repair it by yourself.

Phenomena	The reason	How to settle
After the reservation is started,
it rings and the digital tub	The top lid is not closed	Close the top lid
display "E0"
	Is the drain hose blocked by	Clean the foreign material.
The draining does not work,or	foreign material?	Open and close the top lid once.
the speed of draining is too	Is the drain hose frozen?	Clean the frozen material.
slow.The digital tub displays	After long running of pump in the	Open and close the top lid once.
"E1" , and it rings.	hot weather,power will be cut au-	Some minutes later the machine will
	tomatically for safe.	continue to work.
Running pauses during spin,	The top lid is not closed	Close the top lid
The digital tube displays "E2",
and it rings.
Safety switch acts, The spin-	Are the laundries put	Re-order the laundries. Close the
ning cannot work (after twice	slantingly?	top lid.
revising). The digital tube dis-		Level the machine in right position.
plays "E3", and it rings.	Is the machine slanting?	Open and close the top lid once.
It does not water inlet or the	The water faucet open or is	Open the water faucet. Open
speed is slow(the water level is		and close the top lid once.
	there water supply failure?
not reached after 15 minutes).		Clean the water inlet valve.
The digital tube displays"E4",	The water inlet valve is blocked	Open and close the top lid
and it rings.		once.
The machine does not act.	Is there power failure?	Use it when the power is on
		Insert the power plug tightly.
(The indicators are off.)	Is the power plug loose?
	Is the machine slanting?	Level the machine properly.
	Are the laundries slanting	Re-order the laundries,
There's abnormal sound	in spinning?
		close the top lid.
inside the machine	Is there metal material
		Fasten the buttons and
	inside the washing mach-
		zipper.
	ine?
The water faucet leaks	Is the jointer screw of the	Fasten the jointer screw
	water inlet hose is loose or	properly.
	twisted awry?

Common phenomena

Phenomena	Explanation
The spinning is intermittent when it starts.	It is to balance the laundries to avoid slanting.
Pause during washing	Supplemental water filled after fabric sensor
	has checked fabric(about 48 seconds).
Push the SPIN button, but it doesn't act.	The program is setting the drain time. A certain
	period is needed before it starts spinning.
The pulsator pauses during water filling in washing and rinsing.	It is to avoid splashing during water filling.
There may be some water flowing out of the drain	It is the water remained in the machine during the
hose in the first use of the machine.	ex-factory performance inspection.
15