Safety precautions
Do not damage the power cord, bend , extend, twist, bind or alter it by force.
Do not press or nip it with weight. If the power cord or the power plug is bad,
or the power plug becomes flexible, to avoid risk it is required to have it replaced
by the technicians of our special shop or the after-sale service department.
Keep the pin of the power plug clean, if the power plug is polluted
with dust, please wipe with dry cloth carefully.
The power cord plug should be convenient
to be pluged in or pluged out with hand
while the washing machine runs normally.
Be sure to pull the plug out and close the
water tap when the machine is idle, when
moving the machine, or when cleaning
the machine. Do not use wet hand to ins-
ert or pull out the power plug.
In case the washing machine is installed
on ground with carpet, do not block the
ventilation hole with carpet.
Do not let the machine share one receptacle with other
electric appliances. If the power plug is damaged, or
the plugging into the receptacle is loose,
do not use the plug any more.
Do not wash water-proof laundries like
the raincoat, bike covers etc. to avoid
abnormal vibrations in spinning.
Do not use water hotter above 50 C .
soft items
The ventilation holes
at the bottom
Do not put the machine at damp place like
the bathroom. Never wash it with water.
Not put wet laundries on the control panel.
Please plug the plug on special receptacle
with rated voltage. Be sure to use single-
phase three pins receptacle. Ensure the
earthingprong of the power receptacle is
earthed reliably. Use leakage protector if
possible.
2