Rinsing

Rinse with water-filling

1.Put the laundries into the wash tub. Select suitable current according to the laundries.

2.Adjust the water level

Set the water level with water level adjusting lever according to the laundries quantity. Then fill suitable water continuously.

3.Rinse

Adjust the wash timer to 5-7 minutes to do rinsing.

The musts in washing

The capacity of washing and spinning of the machine refer to the largest weight of the standard laundries under dry condition that can be washed or spinned in one time. Laundries quantity in one washing cycle shall be lower than the rated capacity. The wash standard capacity of this machine is 5.8 kg. The spin standard capacity of this machine is 5.0 kg

The thickness ,size , type of the cloth will influ- ence the actual washing capacity. It is suit- able to put in reasonable amount of laundries and the laundries can be turned round in wash- ing for one time washing.

Do not select " Maximum " water level for laundries less than 2.4kg, so as to avoid splashing of water.

It is suggested not to use high sudsingdetergent.

Usage of the detergent

How to use the whitener

How to use the washing powder

Rinse with stored water

(Repeat the midway spinning and

rinsing with stored water for 2-3 times)

 

1.Put the laundries into the wash tub. Select suitable current according to the laundries.

2.Fill water to preset water level.

3.Rinse

Adjust the wash timer to 2-3 minutes to do rinsing.

When the laundries quantity is below 2.4kg, please use STANDARD current.If you use "STRONG" current, it may splash.

Fill water to decided level. Dilute the whitener with container.

Pour it slowly into thewashing tub.

Avoid using whitener on laun- dries with color or pattern as they are prone to lose color.

The whitener shall not touch the laundries directly.

Refer to the user's manual for the usage and quantity of the whitener.

For powder whitener, please dissolve it before using.

Direct dissolved in the machine: 1.Fill small quantity of water. 2.Add the powder . Run for 30

seconds to dissolve it completely. 3.Put it in the laundries. Select suitable

water level.

The instant dissolving of the washing powder:

1.Prepare warm water of 30 C and a container.

2.Add the powder while stirring to fully dissolve it.

The powder is more prone to pollute the laundries than the detergent. Therefore please use it with proper quantity.

Dosage of different washing powder is different. Please refer to the instruction of the washing powder for the detail dosage.

10

7

 

Page 9
Image 9
Haier HWM60-113S user manual Musts in washing, Usage of the detergent