N-Tron 300 Series manual Connectors, Recommended Minimum Wiring Clearance

KEY SPECIFICATIONS
Physical
Height:	3.98” (max.)
Width:	2.01” (max.)
Depth:	4.19” (max.)
Weight:	0.75 lbs.
Electrical
Input Voltage:	10-30 VDC (Regulated)
Input Current:	230mA max. @ 24VDC (Steady State)
Inrush Current:	9.0Amp/0.5 ms max. @ 24VDC
Input Ripple:	Less than 100 mV
Input Wire Size:	6-28 AWG
Environmental
Operating Temperature:		-20°C to 70°C
Storage Temperature:		-20°C to 85°C
Operating Humidity:	10% to 90% (Non Condensing)
Operating Altitude:		0 to 10,000 ft.
Network Media
10BaseT:	> Cat-3 Cable
100BaseT:	> Cat-5 Cable
100BaseFX:	Multimode: 50-62.5/125µm Fiber
	Singlemode: 7-10/125µm Fiber
Fiber Transceiver Characteristics
Fiber Length:	2km*		15km**	40km**
TX Power Min/Max	-19dBm/-14dBm		-15dBm/-7dBm	-5dBm/0dBm
RX Sensitivity Max:	-32dBm		-34dBm	-34dBm
Wavelength:	1310nm		1310nm	1310nm

*=Multimode ** =Singlemode

Connectors

10/100BaseT: RJ45 UTP Ports

100BaseFX: SC or ST Duplex Port(s) (if equipped)

Recommended Minimum Wiring Clearance:

Front: 2" (5.08 cm) for 304TX, 306TX, & 308TX models 5” (12.7 cm) for 302MC, 305FX, & 306FX2 models

Side: 1" (2.54 cm)

80km**

-5dBm/0dBm

-34dBm

1550nm

Rev 100807 14