AIRDRY
RESERVE
WATER
LEVEL
After you open the package, please
lean the washing machine gently down
on soft items ( like the towel cloth,
blanket, etc. ). Install the bottom plate
to the bottom of the machine with
the eight screws by a crossscrewdriver,
then lift the machine up gently. See to the
figure:
Back
Front
Soft items
Screw
Bottom plate
Thelargest allowable slope of the shank base of the machine is 2 .The slantingor rough ground
will result in unstable running or stoppage of the machine. Please adjust it with following methods:
Confirm it's horizontal:
Hang the lead lineto check if it is
horizontal.
Adjust the adjustable leg:
Fasten
Loosen
High Low
the adjustable nut
the adjustable feet
1 .To twist the adjustable leg, please first lift up the
side of the leg slightly,loosen the adjustable nut,
and twist the leg.
2 . After adjustment, fasten the nut.
Please install and adjust the machine according to the requirement of the manual.
It is very important to your security and correct operating the machine.

Install the bottom plate

Adjust the Installation position

Installation and adjustment

4 Push the " water level" button, select suitable water level

Afterswitching on the power, the washing machine will execute fuzzy program automatically to detect the cloth.
Afterdefection, it can set the water level automatically. To select other water level, first push the "start/pause"
button, then push the "water level" button to set the water level.

5 Push the "reserve" button to select suitable reserve

wash program

After switching on the power, the reserve program is set to off mode automatically. If you need to
set the washing procedure to be finished at reserved time, please push the " reserve “ button to
set the reserve wash program. Refer to reserve button in Page 10 for selection.
Confirm the operation of reserveprogram
When the "reserve" function is activated,the indicator light of the program you
have set will be off. The "reserve (hour)" and "time remain"indicator lights will
be on. During reserve procedure, push the "reserve" buttonto display the reserve mode.
To change the running programor cancel the reserve setting, you
need to switch off the powerand make new selection.

7 Push the "Start/Pause" button

6 Finish washing

After finishingwash it'll alarm automatically
START
PAUSE

6 Push the "Air dry"button

Attention:after switiching on the power,the function of the "dry" and "program" is
not selected at same time