Haier HWM80-928NZP Connection between the water inlet hose and the washing machine, Connection between the jointer of the water inlet hose and the water inlet hose, Check the connection between the jointer of the water inlet hose and the water faucet, Dismantle the water inlet hose

10
Do not take off the water absorption cushion. 1.
Please check if the cushion is dropped or
damaged before each usage. If it happens
please contact our after-sale department
immediately.
Put the nut of the water inlet hose on the valve 2.
jointer.
Fasten the nut. Swing it gently to confirm if it’s suitable.3.
Push down the slider. Insert the water inlet hose into 1.
the jointer.
Hang the lock lever to the jointer. 2.
Release the slider till a click sound is heard.
Connection between the water inlet hose and the
washing machine
Connection between the jointer of the water inlet hose and the
water inlet hose
Jointer of the water
inlet hose
Slider
Locking lever
Nut of the water inlet hose
Water absorption cushion
Jointer of the water inlet valve
Swing the hose gently to confirm if it is fastened 1.
stable.
After installation, open the tap to check if it leaks.2.
Do not bend the hose with overstrain.3.
Before each usage please check if the connection 4.
between the jointer of the water inlet hose and the
water tap, and the installation of the water inlet hose
are firm, so as to prevent dropping from improper Installation position.
Close the water faucet.1.
Press the locking lever. Push down the slider. Then pull off the 2.
water inlet hose. If the machine is used more than once every
week, the jointer of the water inlet hose can be kept on the tap to
prevent damaging the fixing screw.
Check the connection between the jointer of the water inlet
hose and the water faucet
Dismantle the water inlet hose
Locking lever
Slider
The new hose-sets supplied with the appliance are to be used and
that old hose-sets should not be reused.