D “Soak”“Wash”,“Rinse”,“Spin” button

Press the “Soak”,“Wash”“Rinse”,“Spin” button to select the desired soak time,wash time, rinse times and spin time from the Standard, Normal, Memory, Cotton, Child, Night Wash programs.

Press “Wash”“Rinse”,“Spin” button can change the process, can not change wash time, rinse times and spin time from the Blanket programs. Press “Soak” button, can not change time and the process from the Blanket programs.

For Wool program, press “Soak”,“Wash”“Rinse”,“Spin” button, can not change times and the process.

During rinsing times setting, it could be selected whether overflow rinsing is required or not according to actual demand. If overflow rinsing is set, water is continued to fill into the washing machine after setting level is reached, until it is overflow, then foam in barrel will spill out of spillway port, so as to prevent foam and dirt floating on surface pollute laundry again (note:

if low level or pressure is selected, and it may not reach overflow level, then overflow rinsing will transfer to storage rinsing.)

E “Water Level” button

During Standard or Memory program with washing process. The washing machine can detect the laundries automatically. After detection, it will set the water level to suitable value among 35L, 45L, 53L,61L,70L (26L, 33L, 39L, 45L, 51L for HWM70-928NZP) automatically.

Water level could also be determined by user, but it couldn’t automatically again after this machine started. You shall push the “Start/Pause “ button to make new setting.

If there’s water inside the tub, the machine cannot detect the laundries and will display water level 45L(33L for HWM70-928NZP). If wet laundries are put in, it may display water level 70L( 51L for HWM70-928NZP). You must set suitable water level by yourself.

During operation of Wash and Rinse programs, you can push down the Water Level button to add water. When you release the button, or it reaches the overflow water level, the machine will stop adding water.

The water level decided may be different from actual value because of the different moisture level of the laundries.

The rinse water value will be one level higher than the wash water value.(Except the highest water level and when the rinse water level is selected by yourself).

Under the wool and Blanket program, only the 45L to 70L water level(33L to 51L for HWM 70-928NZP) can be selected.

F“Quick”“Strong” button

For Standard, Normal, Memory, Cotton, Wool, Child, Blanket, Night Wash program, press “Strong” button, can increase washing time from originally time(arrive at 25 minutes at most), can increase rinse times 3 times at most press “Quick” button, can reduce washing time from originally time(at least 8 minutes), and rinse times become once.

Press “Quick” button over 5sec. it could enter standard test program after standard indicator become flash.

G “Speed” button

Press “Speed” button can adjust WashRinse,Spin speed.

For Standard, Normal, Memory, Cotton, Child, Night Wash program, press “Speed” button once, can set differ speed: Low, Medium, High.(differ water level default differ speed: the first 4 low water level default low speed, the middle 4 water level default medium speed, the last 4 high water level default high speed)

For Wool, Blanket program, press “Speed” button, can not adjust speed, default low speed.

14

Page 14
Image 14
Haier HWM80-928NZP user manual SoakWash,Rinse,Spin button, Water Level button, QuickStrong button, Speed button