Before Use
Installation
Fitting the base cover
Before removing the transportation bolts, please fix the base cover to the bottom of the washing machine. Lay down the machine (fig1) screw off the feet and adjust the base cover with the four holes corresponding to the screw holes of the feet. Then screw the feet back on through the cover and fix it securely to the bottom of the machine (fig2).
The base keeps out any dampness and reduces the noise
Removing the transportation bolts
The transportation bolts are designed for clamping,anti- vibration components inside the washing machine during the transportation process
Remove the back cover. Fig 1.
Remove the four bolts on the rear side and take out the
synthetic stabilisers from within the machine Fig 2
Replace the back cover. Fig 3.
Fill the holes left by the bolts with blanking plugs. Fig 4.
When replacing the back cover, ensure the convex surface is facing outwards, and insert the back cover between the gaps as shown in Fig. 5.
Keep the transportation bolts and synthetic stabilisers in a safe place for later use
Adjusting the feet
There are adjustable feet under the bottom of the washing machine. Before use, they should be adjusted so that the machine is level. This will minimize vibrations and noise during use. It will also reduce wear and tear. We recommend using a spirit level to level the appliance. The floor should be as stable and flat as possible.
8