Safety precautions

Please insert the power cord into special receptacle with rated vol- tage. Be sure to use single-phase three pins receptacle. The earthing terminal of the receptacle must be earthed reliably. If possible, please adopt electric leakage protector.

When the machine is normally using, please put the power plug at the location easily to be insert- ed and extracted by hand. Be sure to pull the plug off when there's power failure, or the machine is being moved, cleaned or when it is idle.

If the power cord is bad, to avoid risk it is required to replace it by the technicians of our special shop or the after-sale service department. Keep the pin of the power plug clean.

Do not put the machine at damp place like the bathroom . Never wash it with water. Do not place wet laundries on the control panel.

In case the washing machine is installed on ground with carpet , do not block the ventilation hole with carpet.

Ventilation hole at the bottom of the washing machine

Do not let the machine share one receptacle with other electric appliances. If the power plug is damaged, or the plugging into the receptacle is loose, do not use the plug any more.

Do not use water hotter than 50 C .

Do not wash water-proof laundries like the raincoat, bike covers etc. to avoid abnormal vibrations in spinning.

2

Page 4
Image 4
Haier HWM90-0713S user manual Safety precautions, Do not use water hotter than 50 C