How to change the direction of the drain hoses
Figure 1 indicates the ex factory installation |
| |
position of the drain hose. | Back | |
Soft item | ||
| ||
Extend the drain hose from the side of spin tub | Front | |
|
Put soft items on the ground. Lean the machine down gently with the front surface facing the ground. Take off the drain hose from the cabinet. Take the hose out of the fixing groove.
(See to Figure 2).
Embed the drain hose into the groove along the 
side of the spin tub in the order of (1)~(3), heading Soft item
for the side of the spin tub. (See to Figure 3).
Embed the drain hose into the groove with hands. Take care not to damage the drain hose in fastening the fixing clamp.
Extend to the spin tub side
Figure 1
Figure 2
Embed into the groove in turn
Figure 3
Install the water inlet hose; Select the water level
Insert the water inlet hose into the
|
| Water level | |
Water inlet hose |
| indicator | |
Select water level according to the |
| Max | |
Water inlet | Maximum | ||
quantity of the laundries. |
| ||
Set the water level adjusting lever | Medium | Med | |
Min | |||
Minimum | |||
to needed line. | |||
|
5
