Haier HWM90-98

Innercover shaft

Outertub cover

shaft groove

Outertub cover

Innercover

Install the bottom plate

After opening the package, please lean

the washing machine gently down on

soft items (like towel cloth, blanket, etc.).

Install the bottom plate to the bottom

of the machine with eight screws by a

cross screwdriver, then lift the

machine up gently. See to the figure:

Adjust the Installation position

The largestallowed slope of the shank base of the machine is 2 .The slanting or rough ground will result in

unstable running orstoppage of the machine. Please adjust it with following methods:

Confirm it's horizontal

Hang the plumb to confirm it's

horizontal

Adjustthe adjustable foot

(1) To twist the adjustable foot at the right front of

the cabinet (front the sight of front), please first

lift up the side of the foot slightly, loosen the

adjustable nut, and twist the foot.

(2) Fasten the nut after adjustment.

Loosen Fasten

High Low

adjustable nut

adjustable foot

Please install and adjust the machine according to the requirement of the manual.

It is very important to your security and correct operating the machine.

Before Using

Installation and adjustment

Install the inner cover components

1.Open the top lid ofthe washing machine.

2.Putthe inner cover component on the outer tub cover, aiming

the innercover shaft to the installation hole ofthe corresponding

outertub cover shaft groove.

3.Firstly insert the innercover shaft of I side into the correspon

-ding outertub cover shaft groove, then push the another inner

covershaft into the corresponding outer tub cover shaft groove.

Please install to designated position to guarantee there are no

dropping or abnormal sound in opening and closing of the inner

cover, and the operation shall be smooth.Do notdismount the

innercover component after washing.

Soft items

Back

Screw

Front

Bottom plate