START
TIME REMAINED(MINUTE)
RESERVE(HOURS LATER)
RESERVE
Push the "START/PAUSE"button
PAUSE
5 Close the top lid
6 Finish washing
After Finishing wash
alarm automatically
As the top lid opened ,the Washer willautomatically give an alarm
and stop running , exclusively during supplying water and rinsing.
After finishing wash it'llswitch off the power automatically.
Push the "reserve" button to select suitable reserve wash program
* Totaltime: including the normalwater inlet time and drain time. The total washing time may be influenced by
the waterinlet pressure and water level.
* Spin time:From the moment the intermittent spinning starts to the moment it stops running (the time displayed
on spin digitron is from intermittent spinning to the moment before inertia spinning; the time displayed on the
time remain digitron is the totalremained time)
* In selecting "posthaste" program, the washing machine will set the complete procedures of water level
selectior,washing, rinsing and spinning automatically.
* During saving waterprogram, if the water inlet pressure is lower, the machine will come into rinse with water .
* When selecting soak procedure,it will first soak for 10~40 minutes , then do washing , rinsing and spinning .
After switching on the power,the reserve program is set to off mode automatically. If you need to set the washing
procedure to be finished atreserved time, please push the " RESERVE " button to set the reserve wash program.
Refer toRESERVE button in Page 11 for selection.
When the "reserve"function is activated, the indicator light of the program you have set
willbe off. The remained time will be displayed. During reserve procedure, push the
"RESERVE"button to display the reserve mode.
To change the running program orcancel the reserve setting, you
need to switch off the powerand make new selection.
the washing willbe finished after 18 hours.
Confirm the operation ofreserve program
Page
Using process
Using process
14