1.After washing,close the water faucet. (If needed, you can dismantle the water inlet hose).
5.Wipe off the water drops on the surface ofthe machine and inside the tub. Open the top lid for some time (
about1 hour), then close the top lid.
4.Hang up the power cord and drain hose.
3.Be sure to pull off the power plug before maintenance.
2.Do notstore water in the washing machine for a long period. Drain the water completely after each using.
The filter screen ofthe water inlet valve is likely to be
blocked by foreign materials and influence the water
inlet.
Please clean itwith brush every two months.
If the cabinetis dirty, wipe it with wet cloth
Do notflush it directly with water.
Wipe itwith neutral detergent.
Do notwipe it with thinner, petrol, alcohol etc.
After using,please clean the lint and foreign materials of the lint filter etc. in time. Otherwise it may influence
your using the machine.
Disposal after washing
Please firstpull off the power plug from the receptacle before cleaning.
Clean the detergentbox and set it on
the controlpanel seat.
1.The method ofdismantle : Push it up aslant and gently.
2.The method ofinstall : install it upwards and aslant
and push itin .
Dismantle Install Dismantle
Install
The lintfilter must be used during washing.
It mustbe cleaned in time after each using
Lintfilter:
1.Pull itup to dismantle.
2.Push itdown to install.
3.Clean the filterscreen after washing.
Clean
Dismantle and install
Dismantle Install
Benzene
Using process
Using process
15