Tuning
There are three ways of searching: automatic search, manual search and MFT (manual fine tune).
You may operate it either on the TV or on the remote control. Here is mainly about the remote control.
Auto search
MENU
AUTO SEARCH
1.Press MENU button and CH+/- to select TV SETTING (note: TV SETTING is only available in TV)
CH+
VOL-VOL+
CH-
2.Press MENU button to enter the TV SETTING and CH+/- to select AUTO SEARCH
IMAGE SETTING
TV SETTING
VIDEO ADVANCE
OSD SETTING
SOUND SETTING
RESET
INPUT SOURCE
720 | 576 | 50HZ |
CH+
3.Press MENU button to enter the AUTO SEARCH. Press CH+/- or VOL+/- to select ON, and MENU to confirm.The TV set will search automatically all available programs, after that, all available program will be stored in turn and the TV set will return to the first channel
CHANNEL | 4 |
SOUND |
|
SKIP THIS | OFF |
AUTO FINE | ON |
FINE TUNE 
MANUAL SEARCH AUTO SEARCH
AUTO SEARCH
OFF ON
VOL-VOL+
CH-
Note:The order of the automatic search is due to the frequency of the program, generally speaking, it is used only at the first time you search the program, and once the order of the program has been confirmed, you don't have to use this function, otherwise the
order of the program will be changed.
After searching
Press CH+/- button to check the channels.
If the sound is abnormal in a certain channel, it
may be the sound system has not been set properly,
so you should adjust it to the proper system (Reference to page 9).
