Preparation for the Remote Control
Battery loading
1.Slide open the cover of the battery compartment on the back of the remote controller.
2.Load two 5# alkaline batteries in the compartment. (plus and minus poles to respective mark)
3.Replace the cover of the battery compartment.
-
+
Make sure that there is no obstacle between the remote controller and television set.
Keep the remote controller away from heat source or humid area to ensure effective performance of the remote controller.
As strong light may interfere the signals, change your position to operate the remote controller if the television cannot be turned on or off as you expect.
Make sure that two 5# 1.5V alkaline batteries are loaded. The batteries must be of the same type. The batteries must be located properly. The batteries are not rechargeable.
