DataSide
Basic Playback

Preparations

Pressthe DTV/DVD button on the remote controltoenter the DVD status.
1.Place the DVD in the disc slot as figure above. The
discwill be loaded automatically after one to two
seconds,then the DVD player reads the DVD and
displaysthe opening menu. Ifthere is no disc placed
onthe disc slot inDVD mode, OPEN will display on
thescreen all the times)
Thereis only one disc size can be loaded in
thedisc slot .
Donot place adisc which is unplayable inthis
DVDplayer.
Somedisc may not playback automatically,
you can pressPLAY/ENTER button to start
playback.
2.Some disc may start playback with amenu,
use the cursorbutton on the remote control to
select menu options and press PLAY/ENTER to
start, or press digits to select a menuoptions
directly.
1
2
.Press PAUSE/STEP topause playback (still mode).
Thesound will be muted during still mode.
.Press PLAY/ENTER to resume normal playback.

Pauseplayback

1.
2.
3.
PressSTOP buttonto go to stop mode, the TV
screenwill show the start-up logo. For some disc
theplayer can recall the location where stopped,
suchas DVDs and audio CDs.
PressENTER/PLAY to resume playbackfrom the
locationwhere playback is stopped.
PressSTOP twice to stop completely.

Stopplayback

Previousand Next

Duringplayback, press PREV key can go back
tothe beginning of this chapter, then each press of
thiskey will skip a chapter till the start of the disc.
(note:Disc function may vary depending on disc
format)
Eachpress of NEXT keyduring playback will
skipthe current chapter and play the next one.

Fastforward and Fast reverse

1
2
3
4
.Press FWD tofast forward through the disc.
Eachtime the FWD buttonis pressed, the fast
forwardmotion speed changes. It would cycle
through2X, 4X, 8X, 16X, 32X and normal.
.Press PLAY/ENTER to resume normal playback.
.Press REV to fast reverse through the disc.
Eachtime the REV button is pressed, the fast
reversemotion speed changes. It would cycle
through2X, 4X, 8X, 16X, 32X and normal.
.Press PLAY/ENTER to resume normal playback.

Basicplayback

1
2
.Press the PAUSE/STEP button to pause the
playback.
.To view the next frame, press the PAUSE/STEP
button.Each press of the PAUSE/STEP button
advancesthe film by one frame.

Singlestep playback

Basic PlaybackNote:The unit do not allow enter DVD mode(or placeaDVD in the disc slot) again after it have just left toavoidany damage of the DVD. Wait for 10 secondstoenter again.
Pressthis button can zoom enlarge or lessen the picture.
Eachtime pressed the picture times will be change.

ZOOM

Whenpressing the D.CALL button repeatedly
differentOSD indicator will be displayed for
differenttypes of disc DVD, CD etc
D.CALL Inzoom mode press navigation buttons to move
thepicture displayed on the screen